270mm HTC Bush Hammer Plates With 6 Rolls

The concrete flooring bush hammers are good for exterior floor applications. Bush hammer rollers produce bush-hammered profiles on floors, great for use on exterior spaces and creating anti-slip surfaces. Concrete Texturing Tools also work great for removal of thin coatings when prepping the floor for epoxy application, fit Husqvarna, Scanmaskin, Schwamborn, Terrco grinding machines upon request.

The concrete bush hammer is ideal for exterior floor applications. Bush hammer rollers create a bush-hammered profile on concrete, ideal to use on exterior spaces and create anti-slip surfaces. Concrete Texturing Tools also work great for removal of thin coatings when prepping the floor for epoxy application, suitable for HTC, Husqvarna, Scanmaskin, Lavina, Klindex, Schwamborn, Terrco grinders and other grinding machines.

The M14 thread or 5/8-11 thread bush hammer tool can be used to floor machines or handheld powerful grinders for bush hammering of concrete floors and surfaces.

The M14 thread or 5/8-11 threaded 150mm bush hammer tool can be used to floor machines or handheld powerful grinders for bush hammering of concrete floors and surfaces.

The premium concrete flooring bush hammers are good for exterior floor applications. Bush hammer rollers produce bush-hammered profiles on floors, great for use on exterior spaces and creating anti-slip surfaces. Concrete Texturing Tools also work great for removal of thin coatings when prepping the floor for epoxy application, fit Husqvarna, Scanmaskin, Schwamborn, Terrco grinding machines upon request.

The concrete flooring bush hammers are good for exterior floor applications. Bush hammer rollers produce bush-hammered profiles on floors, great for use on exterior spaces and creating anti-slip surfaces. Concrete Texturing Tools also work great for removal of thin coatings when prepping the floor for epoxy application, fit Husqvarna, Scanmaskin, Schwamborn, Terrco grinding machines upon request.

The concrete bush hammer is ideal for exterior floor applications. Bush hammer tools can texture or bush hammer the surface of stone and concrete to get a decorative finish or non-slip finish. It also work great for removing thin coatings when prepping the floor for epoxy application.

The bush hammer plate which adopts the sophisticated welding technology is ideal for exterior floor applications. It can texture or bush hammer the surface of marble, granite and natural stones to get a decorative finish or anti-slip finish. And also work great for floor preparation before laying new coatings.

The 230mm bush hammer plates with 3 rolls is designed for HTC machines. They are aggressive for concrete surface profiling and give a texture surface with slip resistance.

Diamond Polishing Drum Wheels are designed for polishing inside radius surface of undermount sink. They are much more easier than general flexible diamond polishing pads to use when polishing inside surface of sink. Wet polishing will result in better shine and also the polishing wheels will last longer. With 5/8-11 thread or M14 thread, the wet diamond polishing drums can fit most handheld polishers and grinders. There are 7 different grits including grit 50 100, 200, 400, 800, 1500, 3000.

Quick Change Trapezoid PCD coating removal tools for floor preparation with rectangle segments are designed to remove thin coating over a floor surface and will not damage the concrete floor. The supporting rectangle segments act as a stabilizer and depth guide for coating removal tools, and reduce the gauging of the floor caused by the aggressive PCD segments.

The Scanmaskin PCD tool is specifically designed for aggressive material removal and coating removal applications. With 9 PCD segments, this Scanmaskin PCD removal tool offers exceptional grinding power and efficiency.