The epoxy floor spiked shoes are designed specially to protect the floor during the installation of epoxy, self-leveling and decorative coatings. The spikes on the concrete spiked shoes are strategically positioned to provide optimal traction and prevent slippage. They effectively distribute your weight across the surface, allowing for even application and minimizing the chances of leaving footprints behind.
Item NO.:
SSColor
BlackLength:
30CM, 32CM, 36CMApplication:
Epoxy Coatings, Overlays, Decorative Concrete and Self-leveling
English
français
Deutsch
русский
italiano
español
português
العربية
日本語
Polski
中文
High Quality Shoe-In Spiked Shoes for Installation of Epoxy Self-Leveling and Decorative Coatings
Features
- Spiked shoes for coatings with interchangeable spikes;
- Superior Stability spiked shoes for coating installation;
- Available sizes: 9# (Length 30CM), 11# (Length 32CM), 16# (Length 36CM);
- Simplify your preparation with a design that fits either foot interchangeably;
- Flexible and light weigh spiked shoes for resinous coatings;
- Easily put on and take off these shoes;
Application
Epoxy Coatings, Overlays, Decorative Concrete and Self-leveling
Packing
The M14 thread or 5/8-11 thread bush hammer tool can be used to floor machines or handheld powerful grinders for bush hammering of concrete floors and surfaces.
Diamond Polishing Drum Wheels are designed for polishing inside radius surface of undermount sink. They are much more easier than general flexible diamond polishing pads to use when polishing inside surface of sink. Wet polishing will result in better shine and also the polishing wheels will last longer. With 5/8-11 thread or M14 thread, the wet diamond polishing drums can fit most handheld polishers and grinders. There are 7 different grits including grit 50 100, 200, 400, 800, 1500, 3000.
The Husqvarna coating removal tool with one triangle bar segment is designed specifically for efficient removal of thick epoxy floor coatings. Featuring a durable TCT segment, this Redi lock coating removal tooling offers superior cutting performance and extended tool life.
Premium quality metal diamond tools for Redi lock systems grinding machines, 13mm high diamond segments are designed to get longer service, a good choice for concrete floor grinding and floor prep.
200mm concrete grinding head with 6 rectangular segments are designed for concrete terrazzo marble floors.
Fast Change Trapezoid PCD coating removal tooling with 9 PCDs is designed to quickly remove thin coating over a floor surface, very aggressive grinding efficiency.
Lavina PCD coating removal tools with 2 TCT round bar segments are designed to remove thin coating over concrete floor surfaces and will not damage the concrete floor. The supporting TCT segments act as a stabilizer and depth guide for coating removal tools, and reduce the gauging of the floor caused by the aggressive PCD segments.
Trapezoid diamond tooling with three round segments are designed for concrete and terrazzo floor grinding, three 12.5mm high segments achieve longer lifespan on floor grinding.
Metal bond concrete floor grinding tools with two diamond segments are designed specifically for quick removal of concrete and terrazzo. The hard segment of trapezoid grinding tooling is ideal for removing heavy coating, which is extremely aggressive leaving and deep to medium scratch pattern.
The Scanmaskin PCD tool is specifically designed for aggressive material removal and coating removal applications. With 9 PCD segments, this Scanmaskin PCD removal tool offers exceptional grinding power and efficiency.
The professional quality PCD coating removal wing is designed with 2 full round PCD segments and 1 TCT button for Scanmaskin grinding machines. The TCT button balances the whole PCD wing during the coating removing process and protects the 2 full round PCD segments to ensure complete PCD life.
Grinding cup wheel with spiral segments are designed for grinding concrete and is also generally used for material removal purpose.
IPv6 network supported
