Bush Hammer with M14 or 5/8-11 Thread

The concrete bush hammer is ideal for exterior floor applications. Bush hammer rollers create a bush-hammered profile on concrete, ideal to use on exterior spaces and create anti-slip surfaces. Concrete Texturing Tools also work great for removal of thin coatings when prepping the floor for epoxy application, suitable for HTC, Husqvarna, Scanmaskin, Lavina, Klindex, Schwamborn, Terrco grinders and other grinding machines.

The M14 thread or 5/8-11 threaded 150mm bush hammer tool can be used to floor machines or handheld powerful grinders for bush hammering of concrete floors and surfaces.

The premium concrete flooring bush hammers are good for exterior floor applications. Bush hammer rollers produce bush-hammered profiles on floors, great for use on exterior spaces and creating anti-slip surfaces. Concrete Texturing Tools also work great for removal of thin coatings when prepping the floor for epoxy application, fit Husqvarna, Scanmaskin, Schwamborn, Terrco grinding machines upon request.

The concrete flooring bush hammers are good for exterior floor applications. Bush hammer rollers produce bush-hammered profiles on floors, great for use on exterior spaces and creating anti-slip surfaces. Concrete Texturing Tools also work great for removal of thin coatings when prepping the floor for epoxy application, fit Husqvarna, Scanmaskin, Schwamborn, Terrco grinding machines upon request.

The concrete bush hammer is ideal for exterior floor applications. Bush hammer tools can texture or bush hammer the surface of stone and concrete to get a decorative finish or non-slip finish. It also work great for removing thin coatings when prepping the floor for epoxy application.

The bush hammer plate which adopts the sophisticated welding technology is ideal for exterior floor applications. It can texture or bush hammer the surface of marble, granite and natural stones to get a decorative finish or anti-slip finish. And also work great for floor preparation before laying new coatings.

270mm bush hammer plates with 6 rolls is designed for HTC Floor Grinders. They are aggressive for concrete surface profiling and give a texture surface with slip resistance.

The 230mm bush hammer plates with 3 rolls is designed for HTC machines. They are aggressive for concrete surface profiling and give a texture surface with slip resistance.

The Husqvarna bush hammer with 3 rolls are designed for Husqvarna Redi Lock machines, ideal for creating non-slip surfaces and exposing aggregate on concrete and stone. These durable Redi lock bush hammers deliver aggressive surface texturing, ensuring high efficiency and long-lasting performance for floor preparation and textured surface creation.

Diamond Polishing Drum Wheels are designed for polishing inside radius surface of undermount sink. They are much more easier than general flexible diamond polishing pads to use when polishing inside surface of sink. Wet polishing will result in better shine and also the polishing wheels will last longer. With 5/8-11 thread or M14 thread, the wet diamond polishing drums can fit most handheld polishers and grinders. There are 7 different grits including grit 50 100, 200, 400, 800, 1500, 3000.

The epoxy floor spiked shoes are designed specially to protect the floor during the installation of epoxy, self-leveling and decorative coatings. The spikes on the concrete spiked shoes are strategically positioned to provide optimal traction and prevent slippage. They effectively distribute your weight across the surface, allowing for even application and minimizing the chances of leaving footprints behind.

Engineered for concrete and stone renovation, this electroplated coating removal wheel efficiently handles extremely rough surfaces. The stone electroplated diamond grinding wheel removes old coatings and prepares floors for finishing, suitable for both wet and dry grinding.