TransGrind manufactures complete series of Scanmaskin diamond tooling, our premium Scan Combiflex diamond tools are designed for concrete grinding, terrazzo grinding, floor grinding, coating removal, surface preparation etc. Extra hard bond Scan Combiflex tools, Hard bond Scanmaskin metal tools, Medium-hard bond Scanmaskin tooling, Soft bond Scan diamond tools, Super soft bond metal tools, Super super soft bond Scan grinding tools and customized tools are available.
Scanmaskin concrete floor diamond grinding tooling are designed to be used on concrete, terrazzo, and other types of stone surfaces. The Single W Segment design of these floor Scanmaskin grinding tools makes it easier to remove coatings, adhesives, and other materials from floors. Additionally, these grinding segments for Scanmaskin offer a longer life span and easy to use.
Resin floor polishing pads with velcro backing are designed to be fitted on most floor grinders and polishers. These super glossy diamond polishing pads got the grits from 50# to 3000#, which could do rough grinding and fine polishing for concrete floor shining.
The 2 inch ceramic grinding tools pads are designed for an effortless transition from metals to resins. The aggressive ceramic and diamond matrix are designed for eliminating the deeper scratches left by the metal bonding stages, eliminating the need of bond with the metal multiple times. Polishing Pads For Hard Concrete feature an impressive triple filtered diamond content ratio that allows aggressive cutting and perfectly consistent scratch patterns.
Scanmaskin Concrete Grinding tools with 2 diamond segments are suitable for concrete and floor surface preparation. Segments of Scanmaskin Grinding pads are designed for aggressive grinding of concrete to make short work of your larger projects. These High Quality Diamond Grinding Tools are also ideal for the initial steps in concrete polishing procedures.
Premium
quality metal diamond tooling for Scanmaskin grinding machines, 13mm segments are
designed to get longer service life, a great diamond tool for concrete floor
grinding and floor preparation.
Scan PCD tools for preparation with arrow segments are designed to remove coating over a surface and will not damage the concrete floor. The supporting arrow segments act as a stabilizer and depth guide for coating removal tools, and reduce the gauging of the floor caused by the aggressive PCD segments.
Big W segment 40X12X12mm design achieves quick grinding and long lifespan, increases cutting efficiency and help to save a large amount of cost on surface preparation.
Quick change round 50mm PCD coating removal tooling with 2 button segments are designed to remove coating over a floor surface and will not damage the concrete floor. The supporting round segments act as a stabilizer and depth guide for coating removal tools, and reduce the gauging of the floor caused by the aggressive PCD segments.
The concrete
flooring bush hammers are good for exterior floor applications. Bush hammer
rollers produce bush-hammered profiles on floors, great for use on exterior
spaces and creating anti-slip surfaces. Concrete Texturing Tools also work
great for removal of thin coatings when prepping the floor for epoxy
application, fit Husqvarna, Scanmaskin, Schwamborn, Terrco grinding machines
upon request.
The Lavina adapter easily attaches to Lavina grinding machine, and allows the fast change system to be outfitted with both HTC EZ change tooling and Scanmaskin Snap-on tools. Installation is simple and quick which simply slides in the adapter and attach the tooling. This adapter has HTC block with Scanmaskin fast change groove and allows you to run both HTC and Scanmaskin grinding tools on all Lavina grinding machine.
Fast Change Trapezoid PCD coating removal tooling with 9 PCDs is designed to quickly remove thin coating over a floor surface, very aggressive grinding efficiency.
The Lavina tool adapter easily attaches to Lavina floor grinding machine, and allows the fast change system to be outfitted with Scanmaskin Snap-on diamond tools. Installation is very simple and quick which simply slides in the adapter and attach the tooling. This adapter has compatible Scanmaskin fast change groove and allows you to run Scanmaskin grinding tools on all Lavina grinding machine easily.
Fast change preparation PCD removal tooling with button segment is designed to remove thick coating over a concrete surface and will not damage the concrete floor. The supporting button segments act as a stabilizer and depth guide for coating removal tools, and reduce the gauging of the floor caused by the powerful half round PCD segments.
Scanmaskin Universal Plate For NewGrind Machines is designed for fitting NewGrind Machines to install Scanmaskin tools. The attachment conforms to Scanmaskin tools size requirements and is easy to install and firm for using.
Scanmaskin diamond grinding disc with 3 big segments is designed for concrete and terrazzo grinding, 8mm/10mm/12mm high diamond segments have good performance on grinding concrete floor.
Scan PCD Removal Tools with 2 full round PCD segments are very aggressive coating removal tools and will leave very coarse profiles on the concrete underneath. These PCD removal wings are suitable for Scan Combiflex grinders to remove thick mastics glues, thick parking deck membranes, epoxy coatings, thick elastomeric membranes and any coating with silica sand broadcast mixed in.
Puck velcro adapters are used on Scanmaskin, Husqvarna, Schwamborn,Terrco grinders with quick change systems and allows for quick and easy tool changing. 3 inch Velcro adapters are designed for 3" resin pads and resin polishing pucks. The great adapter's lip enables the resin polishing puck to stay secured during polishing process. The easy tool fast change backer pad will save you plenty of time and reduce costs for polishing jobs.
The professional quality PCD coating removal wing is designed with 2 full round PCD segments and 1 TCT button for Scanmaskin grinding machines. The TCT button balances the whole PCD wing during the coating removing process and protects the 2 full round PCD segments to ensure complete PCD life.
English
français
Deutsch
русский
italiano
español
português
العربية
日本語
Polski
中文
IPv6 network supported
