Variable Speed Wet Polisher For Concrete Stone Countertop

Handheld grinders and floor edge grinders help to increase production and work effortlessly, these great grinding machines are designed to maximize worker’s comfort and ideal for grinding, polishing and edging concrete surfaces.

Diamond Polishing Drum Wheels are designed for polishing inside radius surface of undermount sink. They are much more easier than general flexible diamond polishing pads to use when polishing inside surface of sink. Wet polishing will result in better shine and also the polishing wheels will last longer. With 5/8-11 thread or M14 thread, the wet diamond polishing drums can fit most handheld polishers and grinders. There are 7 different grits including grit 50 100, 200, 400, 800, 1500, 3000.

2 inch Dry Polishing Drum Wheels are used to polish inside radius of undermount sink holes. They are much easier than diamond flexible polishing pads to use when polishing inside radius. With 5/8-11 thread or M14 thread, dry diamond drums sink polishing wheels can fit most polishers and variable speed handheld grinders. There are 7 different grits including Grit 50 100, 200, 400, 800, 1500, 3000.

Quick change round 50mm PCD coating removal tooling with 2 button segments are designed to remove coating over a floor surface and will not damage the concrete floor. The supporting round segments act as a stabilizer and depth guide for coating removal tools, and reduce the gauging of the floor caused by the aggressive PCD segments.

Concrete Floor Diamond Grinding Plug with one big columnar segments are designed for very aggressive grinding terrazzo concrete floor.

200mm concrete grinding head with 6 rectangular segments are designed for concrete terrazzo marble floors.

Premium quality metal diamond tools for Redi lock systems grinding machines, 13mm high diamond segments are designed to get longer service, a good choice for concrete floor grinding and floor prep.

Husqvarna diamond grinding shoes with two diamond segments are compatible with Husqvarna Redi Lock system for grinding and polishing concrete and terrazzo floor. The diamond segments on these Redi Lock diamond grinding tooling are made from high-quality diamonds that are carefully selected to ensure maximum performance and durability.

270mm HTC plate with 6 HTC adapters is designed to fit HTC Grinder. These conversion plates for HTC are very easy to change and install.

HTC PCD Removal Tools with 5 inverted quarter round PCD segments are very aggressive coating removal tools and will leave very coarse profiles on the concrete underneath. These PCD removal wings are suitable for removing thick mastics glues, thick parking deck membranes, epoxy coatings, thick elastomeric membranes and any coating with silica sand broadcast mixed in.

HTC EZ Change Diamond Tool with Arching BIG segment 40X12X12mm design achieves fast cutting and long lifespan, increases grinding efficiency and help to save a large amount of cost on surface prep.

HTC PCD Removal Tools with 2 full round PCD segments are very aggressive removal tools and will leave very coarse profiles on the flooor underneath. These PCD removal tooling are suitable for removing very thick mastics glues, thick parking deck membranes, epoxy coatings, thick elastomeric membranes and any coating with silica sand broadcast mixed in.