English

Give us a call

+86-18059236229
banner
Technical Guides
Does the epoxy floor need to be ground during the construction process?
Nov 14 , 2022

Does the epoxy floor need to be ground during the construction process? In the process of floor construction, the ground will always be uneven, which will affect the overall construction effect after the floor is completed. Use less paint and enhance the adhesion of the ground, and the effect after construction is more flat and beautiful.

1. Before the construction of epoxy floor paint, the base layer needs to be ground. Epoxy floor is a covered floor. The most feared thing is that the delamination will occur. The ground base treatment is to treat the base layer into a rough surface, increase the contact surface between the epoxy coating and the ground, and increase the adhesion of the epoxy layer.

When constructing the epoxy floor, first confirm the condition of the surface on the ground. The environment is relatively clean. If there are oil stains and other stains on the ground, or if the surface is uneven or loose, it will directly affect the construction quality and the effect of the epoxy floor. , At this time, the ground should be smoothed, which can not only save the amount of floor paint, but also increase the adhesion to the bottom layer, and the overall look is more beautiful and flat, and the effect is better. The newly built cement floor should also be ground to remove the ash powder and open the cement pores, so that the epoxy primer can better penetrate, ooze and absorb, which has a very important effect on the quality of the epoxy floor.




TransGrind Diamond Tools Hot Products,click the picture for more details


The standard after the base layer is ground: the bottom layer is flat, the strength of the base surface meets the planning requirements of the construction personnel, and there is no phenomenon such as sanding, honeycomb, and pockmarked surface; the base layer should be kept dry enough, and the moisture content should be less than 10%.

2. After the construction of epoxy floor paint is completed, there is no need to polish the surface coating. Just do a good job of daily maintenance, and if necessary, you can regularly wax and maintain.

TransGrind supply different kinds of diamond tools for floor grinding and floor polishing. We have supplied many different kinds of diamond tools for many customers, such as Scanmaskin tools, Lavina tools, Klindex tools, Husqvarna tools, HTC tools etc. Welcome to know more about our products by clicking below picture to get into our official web if you are interested.


Share to facebook

New Products

Leave A Message
Leave A Message
If you are interested in our products and want to know more details, please leave a message here, we will reply you as soon as we can.

Home

Products

About

contact