Edge Grinding Machine for Concrete Edge Grinding

Quick 5 inch wet polishers wet sanders wet grinder are designed for wet polishing concrete countertop, stone countertop and stone marble tile. Variable speed polisher with variable dial control to match required speed for concrete stone wet polishing or dry polishing.

Diamond Polishing Drum Wheels are designed for polishing inside radius surface of undermount sink. They are much more easier than general flexible diamond polishing pads to use when polishing inside surface of sink. Wet polishing will result in better shine and also the polishing wheels will last longer. With 5/8-11 thread or M14 thread, the wet diamond polishing drums can fit most handheld polishers and grinders. There are 7 different grits including grit 50 100, 200, 400, 800, 1500, 3000.

2 inch Dry Polishing Drum Wheels are used to polish inside radius of undermount sink holes. They are much easier than diamond flexible polishing pads to use when polishing inside radius. With 5/8-11 thread or M14 thread, dry diamond drums sink polishing wheels can fit most polishers and variable speed handheld grinders. There are 7 different grits including Grit 50 100, 200, 400, 800, 1500, 3000.

These dust extraction bags are designed for the DC Tromb 400 H dust extractor and other machines, making concrete dust disposal simple and efficient. The replacement dust bags for vacuum effectively seal in all dust and debris, ensuring clean and safe operation on every job.

The diamond grinding pad has 2 teardrop segments with 12mm height, and is suitable for Werkmaster machines. Long-lasting durability of the teardrop diamond segments ensure excellent scratch pattern of concrete floor and terrazzo floor.

Concrete floor grinding HTC diamond tooling with 2 special designed ripple segments are developed for very fast cutting surface of hard concrete floor at the beginning stage.

The Lavina adapter easily attaches to Lavina grinding machine, and allows the fast change system to be outfitted with both HTC EZ change tooling and Scanmaskin Snap-on tools. Installation is simple and quick which simply slides in the adapter and attach the tooling. This adapter has HTC block with Scanmaskin fast change groove and allows you to run both HTC and Scanmaskin grinding tools on all Lavina grinding machine.

The professional quality PCD coating removal wing is designed with 2 full round PCD segments and 1 TCT button for Scanmaskin grinding machines. The TCT button balances the whole PCD wing during the coating removing process and protects the 2 full round PCD segments to ensure complete PCD life.

Scan PCD tools for preparation with arrow segments are designed to remove coating over a surface and will not damage the concrete floor. The supporting arrow segments act as a stabilizer and depth guide for coating removal tools, and reduce the gauging of the floor caused by the aggressive PCD segments.

Premium Diamond Plug with 8 segments are designed for aggressive grinding terrazzo concrete floor with long lifetime.

The Husqvarna concrete floor grinding tools with one hexagon segment is a premium-quality grinding tool designed to deliver exceptional performance on concrete and terrazzo surfaces. With its hexagon segment design, it offers excellent grinding efficiency and precise results. This Redi Lock diamond tool is compatible with Husqvarna Redi Lock grinders, ensuring a seamless fit for efficient grinding operations.

Concrete diamond wheels are designed for aggressive grinding concrete, terrazzo, marble and granite. These metal grinding wheels are typically attached to an angle grinder or other suitable power tool for efficient and precise grinding.