Since diamond is the hardest material found in nature so far, the wear of stone powder on it is very small. But the carcass is different. It is composed of various metal materials, the hardness is lower than that of diamond, and it is easily worn by hard granite powder particles. The premature wear of the carcass will lead to the premature shedding of the bagged diamonds. Such a vicious circle will directly affect the life of the diamond tools.In order to reduce the wear of the stone powder on the diamond cutter head, the following methods can be used:

The method of stone powder purification:

1. Natural settlement method

2. Machine removal method

3. Chemical flocculation

Practice has proved that the wear of stone powder on the diamond cutter head is a problem that cannot be ignored, which reduces the service life of the diamond tools and increases the cost. At the same time, in the process of recycling, it also has a certain wear effect on the equipment, so it is very necessary to purify the stone powder particles in the cooling liquid in time.

Among the above three methods for purifying stone powder, the natural sedimentation method is suitable for removing the stone powder with larger particles; the mechanical cleaning method and the chemical precipitation method are suitable for removing the stone powder with medium and small particles. Obviously, if the conditions are met, the effect will be better if the three are used in combination.

TransGrind is a professional manufacturer of diamond tools for concrete or stone floor, we have supplied many different kinds of diamond tools for many customers, such as Scanmaskin tools, Lavina tools, Klindex tools, Husqvarna tools, HTC tools etc. And we got many good feedbacks from our customers about our premium quality. Welcome to consult for our products by clicking the below picture to get into our official web for more details if you are interested.